Sensors - Temperature and humidity

Temperature probes

Zennio Accesories

REF: ZACNTCF/E/S

Temperature probes available in steel and epoxy.

  • Epoxy (ZACNTCE): 3 m (-30 ºC to 105 ºC)
  • Epoxy stiff cable (ZACNTCF): 3 m (-30 ºC to 105 ºC)
  • Steel (ZACNTCS): 3 m (-30 ºC to 105 ºC)

The Epoxi probe (ZACNTCE) is useful at normal conditions of working and installation. A cable of 3 m cable is included in the product packaging.

The Epoxi probe stiff cable (ZACNTCF) is useful for more complex installations, like canalizations (for example, for radiant floor protection), making easier its installation without any kind of guide cable. A cable of 3 m is included in the product packaging.

The Stainless Steel probe (ZACNTCS) is ideal to measure fluids within ducts or pipes, allowing to measure temperature ranges up to 105 degrees (like an application of regulation or control of solar thermal energy). A cable of 3 m cable is included in the product packaging.

* This accessory must be connected to an input of a Zennio device. To find out if a device is compatible with this accessory, consult the data sheet of the device in question.